Pioneer DVR-650H-K operating instructions Pcm, Mpeg PCM, 106

14The Initial Setup menu

	Setting	Options		Explanation
	DV Input	Stereo 1 •		Select to use the ‘live’ audio track (recorded during
	(DVR-650H-K/			the video shoot) from a camcorder that supports two
	DVR-550H-K only)			stereo audio tracks.
		Stereo 2		Select to use the overdubbed audio track from a
				camcorder that supports two stereo audio tracks.
		Mix		Select one of the three settings to use a mix of the
				two stereo audio tracks.
	Audio Out
	Dolby Digital Out	Dolby Digital •		Output a Dolby Digital signal when a Dolby Digital
				source is being played.
		Dolby Digital		Convert Dolby Digital sources to Linear PCM output.
		PCM		Use if your connected equipment doesn’t have a
				Dolby Digital decoder.
	DTS Out	On •		Output a DTS signal when a DTS source is being
				played.
		Off		Switch off the digital output when a DTS source is
				being played. Use when your connected equipment
				doesn’t have a DTS decoder. In this case, use the
				analog audio outputs.
	96 kHz PCM Out	96 kHz	48 kHz • Convert 96 kHz digital audio sources to 48 kHz
				output. Use if your connected equipment doesn’t
				support 96 kHz sampling rate.
		96 kHz		Output 96 kHz digital audio when a 96 kHz source is
				being played.
	MPEG Out	MPEG		Output an MPEG audio signal when a source using
				MPEG audio is being played.
		MPEG	PCM •	Convert sources with MPEG audio to Linear PCM
				output. Use if your connected equipment doesn’t
				have an MPEG audio decoder.
	Audio DRC	On		Switches on Audio DRC (Dynamic Range Control).
				Use when listening to Dolby Digital material at low
				volume.
		Off •		Switches off Audio DRC.
	Audio DRC is not effective when listening via the digital output when the Dolby Digital Out setting is set to Dolby
	Digital.
	Language
	OSD Language	English •		Sets the language of the on-screen displays to
				English.
		Français		Sets the language of the on-screen displays to
106				French.

En