Getting started

Set ‘Clock Set CH‘ to the channel preset number that broadcasts a time signal, then move the cursor down to ‘Start’ and press ENTER.

The recorder takes a short while to set the time. After you see that it’s set, select Next to proceed.

If the time could not be set automatically, press RETURN to go back to the previous screen and select

Manual.

•Manual clock setting

If no stations in your area are broadcasting time signals, you can set the clock manually.

Use the	buttons to set your
time zone.
k SettingManual Clock Setting		1/2
k SettingManual Clock Setting
Time Zone		Canada
p Navigator		Eastern
		Eastern
D.S.T.		Off

Press then use the		buttons to
set ‘On‘ or ‘Off‘ for daylight saving
(D.S.T), then press ENTER.
Select On if you are currently using
daylight saving.
k SettingManual Clock Setting		1/2
k SettingManual Clock Setting
Time Zone	Canada
p Navigator	Eastern
	Eastern
D.S.T.	On

Set the date (month/day/year) and time, then press ENTER to make all the settings.

• Use the	buttons to change the
value in the highlighted field.
• Use the	buttons to move from one

field to another.

• Press ENTER to finish setting the time.

ENTER

7Select the TV screen type,

‘Wide (16:9)’ or ‘Standard (4:3)’.

SettingTVScreen Size

p Navigator Wide (16:9)

Standard (4:3)

ENTER

8Select whether or not your TV is compatible with progressive scan video.

SettingProgressive

pNavigator Compatible

Not Compatible

Don't Know

•Note that progressive scan video is only output through the component video outputs.

SettingInthe event of HDD failure, recordings may be lost or normal playback/recording may not be possible.

As recordings might be lost in case of a HDD failure, we recommend to use the HDD only as temporary storage media.

Please copy recordings you want to keep to recordable DVD.

Press ENTER to continue.

Pioneer DVR-650H-K operating instructions Getting started