Pioneer DVR-650H-K Initial Setup menu Chapter, Using the Initial Setup menu, Prev Next

14The Initial Setup menu

Chapter 14

The Initial Setup menu

Using the Initial Setup menu

The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on.

Some settings can only be changed when the recorder is stopped. During playback and recording these settings are grayed out in the Initial Setup menu.

Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.

•Press HOME MENU and select ‘Initial Setup’.

In the table below, the default option is marked with a •.

Setting	Options	Explanation
Basic
Clock Setting	Auto	Set the channel that broadcasts a clock signal and
		the clock will be set automatically.
	Manual •	If there is no channel that broadcasts a clock signal
		in your area, you can set the time and date manually.

The clock must be set in order to use timer recording.

HELP Setting	On •	Switches on the automatic Help screens for GUI
		displays.
	Off	Switches off the automatic Help screens for GUI
		displays. (Press HELP on the remote to manually
		display the Help screen.)
Setup Navigator	Start	Select to start the Setup Navigator. See also
		Switching on and setting up on page 30.
Tuner
Auto Channel	Antenna •	Select if you receive channels from an antenna. It
Setting		takes a few moments for the auto tuning to complete.
	Cable	Select if you receive channels via cable. It takes a few
		moments for the auto tuning to complete.
Manual CH Setting	Next Screen	Proceed to the next screen if you need to adjust any
		of the settings made by auto tuning.
		• Change channels using the	PREV/	NEXT
		buttons.

•To skip the displayed channel (because there is no station assigned to that channel), change the Skip setting to On.

•To manually fine tune the channel, change the AFT

104 setting to Off then adjust the Level setting.

En