Pioneer DVR-650H-K operating instructions Editing a timer programme, Deleting a timer programme

05

44

Recording

Editing a timer programme

You can change any of the settings in a timer programme before the recording is due to start.

1Press HOME MENU, select Timer Recording, then Timer Recording.

2Highlight the timer programme you want to change.

3 Press then select ‘Modify’ from the command menu panel.

Alternatively, press ENTER.

The Timer Programme Set screen appears from which you can edit the settings.

4Edit the timer recording settings as necessary.

5Select ‘Store Programme’ to finish. Confirm the settings you made from the following screen.

Deleting a timer programme

You can delete timer programmes you no longer need.

1Press HOME MENU, select Timer Recording, then Timer Recording.

2Highlight the timer programme you want to erase.

3 Press then select ‘Erase’ from the command menu panel.

•Select Yes to confirm or No to cancel.

•You can also just press CLEAR when the timer programme is highlighted.

Skipping a regular timer programme

If you’ve set a regular daily or weekly timer programme, you can set the recorder to skip the next scheduled recording.

1Press HOME MENU, select Timer Recording, then Timer Recording.

2Highlight the timer programme you want to skip.

3 Press then select ‘Cancel Once’ from the command menu panel.

•In the timer programme list, Cancel Once appears by the programme.

• You can also just press PAUSE when the timer programme is highlighted.

Extending a timer recording in progress

You can extend a timer recording beyond the programmed end time in two different ways. This can be useful if a broadcast programme overruns, for example.

Cancelling or extending the timer

1 REC Press and hold for three

seconds during a timer recording. Recording continues, but the timer indicator disappears from the front panel display indicating that the timer has been cancelled.

2 REC Press repeatedly to extend

recording in 30 minute blocks.

Programming a new end time

You can edit the end time of a timer recording you have previously set.

HOME MENU

1 Select ‘Timer Recording’ then ‘Timer Recording’ from the Home Menu.

2Highlight the timer recording you want to change.

	ENTER
3	Press	then select ‘Modify’

from the command menu panel. Alternatively, press ENTER.

The Timer Programme Set screen appears, from which you can edit the settings.

ENTER

4Edit the end time as necessary. You can also edit the Extend time parameter.

En