80 Chapter 8 Track your incoming calls

If you do not remember your Call Log password, programming from Unified Manager can delete the password. For more information about programming using Unified Manager, see the Business Communications Manager Programming Operations Guide.

Change your Call Log password

1Press ¥¡Þ. The display shows Old passwrd:.

2Enter your old password. The display shows New passwrd:.

3Enter your new four-digit password. The display shows Repeat New:.

4Re-enter your password. The display shows Password changed to confirm the change.

Delete an assigned password

1Press ¥¡Þ. The display shows Old passwrd:.

2Enter your old password. The display shows New passwrd:.

3Press or OK. The display shows No pswd assigned, to confirm the change.

Program a telephone to log calls automatically

Your installer can program each telephone to automatically log calls coming in on a line.

1:Unknown name

The caller's name is not available.

 

 

1:Unknown number

12:KATE SMITH

NEXT ERASE MORE

12øKATE SMITH

NEXT ERASE MORE

12¤KATE SMITH

NEXT ERASE MORE

49/1234567890123

NEXT ERASE MORE

Call(s) bumped

The caller’s number is not available.

_ indicates a new item.

øindicates that the call was answered.

¤indicates a long distance call.

/indicates the stored number was trimmed to its final 11 digits. Press Ãor MORE to show additional information about the call.

One or more log entries are deleted by the Autobumping feature while you are viewing at the Call Log.

P0937240 02

Page 80
Image 80
Nortel Networks PO937240 02 manual Change your Call Log password, Delete an assigned password