Nortel Networks PO937240 02 manual System Speed Dial codes, Personal Speed Dial

52 Chapter 4 Time-saving features

2Enter the appropriate two-digit speed dial code.

System Speed Dial codes

System Speed Dial codes are numbered from 01 to 70. The installer assigns numbers to System Speed Dial codes for the all the system.

Note: There is no difference between using User Speed Dial and using System Speed Dial. Only the programming is different.

Personal Speed Dial

To add or change a Personal Speed Dial number on your telephone:

1Press ≤•›.

2Enter a two-digit code from 71 to 94 that you want to relate with a telephone number.

3To include a line selection for this number, press the line or intercom button. To select a line pool, press a programmed line pool button, or press an intercom button and enter a line pool access code. For the T7100 telephone, you can only select a line pool.

4Enter the number you want to program.

5Press ≥ or OK.

01:9___

CANCL BKSP OK

Enter digits

QUITOK

Invalid code

No number stored

Program and HOLD

Program and OK

QUITOK

Continue entering the number you want to program.You can change the number by pressing BKSP or √. When you are finished, press ≥ or OK.

Enter the telephone number you want to program exactly as if you were dialing it normally. When you are finished, press ≥ or OK.

You have entered a code outside the code range (01-70 for system, 71-94 for personal).

There is no number stored on the speed dial code you have dialed.

If you want to program a line or line pool selection for this speed dial number, select the line or line pool. If not, enter the telephone number exactly as if you were dialing it normally. When you are finished, press ≥.

If you want to program a line or line pool selection for this speed dial number, select the line or line pool. If not, enter the telephone number you want to program exactly as if you were dialing it normally. When you are finished, press OK.

P0937240 02