Nortel Networks PO937240 02 manual Erase log items, Make a call using Call Log

Chapter 8 Track your incoming calls 79

Erase log items

You must erase log items that you have read, to make space for new items in your log.

1Display the item you want to erase.

2Press ≥ or ERASE.

3Press ® to exit.

If you accidentally erase an item, you can retrieve the item.

1Press ≥ or UNDO after accidentally erasing an item.

2Press ® to exit.

Make a call using Call Log

You can place calls from within your Call Log. The number stored for a call can vary depending on the type of call. For example, if the call came from a Centrex or PBX system, you can trim the first few numbers before you make the call. If the number you want to call is long distance, or if you want to use a line pool, you may need to add numbers.

To place a call:

1Display the log item for the call you want to place.

2Display the related telephone number.

3Press √ or TRIM, one time for every digit that you want to remove.

4Dial any additional digits required.

5Press an external line or line pool button.

6Lift the handset or press Handsfree.

Create a password to your Call Log

To access your Call Log through a password:

1Press ≤¥¡Þ. The displays shows New passwrd:.

2Enter your four-digit password. The display shows Repeat New:.

3Re-enter your four-digit password. The display shows Password changed, to confirm the change.

To enter Call Log using a password:

1Press ≤¡ÚÛto enter Call Log. If you have programmed a password, the display shows

Password:.

2Enter your four-digit password.

Telephone Features Programming Guide