Chapter 12 System features 103
Each schedule can have its configuration of a service which works separately from automatic start and stop times. For example, in Restriction service, the Night schedule prevents people from making long distance calls. Calling the restriction Night schedule does not limit the use to that specific schedule. You can turn the Night schedule for Restriction service on or off as needed any time of the day or night. If you decide to run a service on a schedule, the system uses the start and stop times used for the schedule you set up.
Turn services on and off using feature codes
You can access the master control for services through the Unified Manager. The following feature codes allow access and control of the
≤°‡⁄ | Turns on Ringing service. When used at the direct dial telephone, |
| it activates the alternate direct dial telephone (extra dial |
| telephone). |
≤£°‡⁄ | Turns off Ringing service. |
≤°‡¤ | Turns on Restriction service. |
≤£°‡¤ | Turns off Restriction service. |
≤°‡‹ | Turns on Routing service. |
≤£°‡‹ | Turns off Routing service. |
To turn a service on:
1Enter the appropriate feature code from a control telephone.
2Press NEXT to move through the schedules until the display shows the version of the service you want turned on.
3Press OK to select the setting, or press QUIT to exit the feature without making any changes. To turn a service off, enter the appropriate feature code from a control telephone.
Caution: Assigning a service as Normal is not the same as canceling a service using a feature code. If you assign the service as Normal, the normal version of a service overrides any automatic schedule and remains until you manually cancel it. When you cancel service by feature code, you return to the automatic schedule.
View active services from a two-line display telephone
When a service is active, the control telephone display shows Services ON.
1Press LIST. The display shows the first active service and the schedule in use.
2If there are several active services, press NEXT to view all of the services.
3Press EXIT to exit the feature.
Telephone Features Programming Guide
