Chapter 3 Make a call 47
Split a conference
You can speak with one caller while the other call is on hold. You can switch between calls using ≥.
On a T7208, T7310, T7316 or M7324(N) telephone:
1Press the line button of the caller with whom you want to speak. The other call is automatically put on hold.
2Press ≤‹to
On a T7100 telephone:
1Press ≤£‹. The first call is put on hold.
2Press ≥ to switch between calls.
3Press ≤‹ to
Leave a conference call
You can remove yourself from a conference, and connect the other two callers.
Enter the Transfer feature code ≤‡‚.
When you remove yourself from a conference using the Transfer feature, and both calls are from outside your system, one of the calls must have come to you on a disconnect supervised line, or the call disconnects.
3 parties only
Conference busy
Line001 221
TRANSFR
Press held line
You are trying to add a fourth party to your conference call, or to join two conferences together. Release one call from the conference before adding another, or keep the two conferences separate.
You have tried to make a conference call, but your system is handling its maximum number of conference calls.
You are on a conference with the two lines or telephones shown. You can drop out of the conference and leave the other two parties connected (Unsupervised Conference) by pressing TRANSFR or entering the Transfer feature code.
You have activated the Conference feature with one call active and another on hold. Press the held line to bring that person into the conference.
For other displays, see Appendix B, “Common display prompts and error messages,” on page 137.
Telephone Features Programming Guide
