Chapter 3 Make a call 45

Cancel Ring Again

Press ≤£¤ to cancel a Ring Again request.

Can't ring again

Ring Again?

YES NO EXIT

You cannot use Ring Again on your current call.You can use Ring Again while you have a busy signal on an internal call or line pool request, or while an internal call is ringing.

Press YES to use Ring Again. Press NO if you select to send a message.

Message

When using Priority Call and Ring Again don’t work, you can leave a message on the person’s display. For more information, refer to “Messages” on page 71.

Create a Conference Call

You can talk to two people at the same time.

1Make sure you have two calls, one active and one on hold.

2Press ≤‹.

3Press the held line. (This action is automatic on the T7100 telephone.) You can create a conference when you are on a call:

1Put the call on hold. (This action is not necessary when the Automatic Hold feature is available on your system.)

2Make a second call.

3Press ≤‹.

4Press the held line.

Only the person who established the conference can use the procedures described in this section.

Note: You can create a conference by releasing privacy on a call. See“Turn

Privacy on or off for a call” on page 96.

Disconnect one party

You can disconnect one party from a conference and continue talking to the other.

Telephone Features Programming Guide

Page 45
Image 45
Nortel Networks PO937240 02 manual Create a Conference Call, Message, Disconnect one party, Cancel Ring Again