Chapter 6 Forward your calls 67
•Press ≥ or OK if the line you have selected as the outgoing line is a private network line that does not require you to dial digits.
4Select the lines to redirect.
If you use ALL to redirect all your lines, ensure that you wait until all the lines on your telephone light up before pressing ≥ or OK. If you press ≥ or OK before all the lines light up, those lines not lit do not redirect.
You can continue to use the line selected for redirecting calls on other lines when the line is not busy on a redirected call. To avoid redirection failing because the selected line is in use, select a line pool with several lines in it. The system does not check that the number you give for line redirection is a valid one. If you redirect to an invalid number, redirection fails. To avoid a redirections failure, use an autodial button to enter the redirection number.You must program autodial buttons used for line redirection to use a specific line.
Cancel Line Redirection
To cancel Line Redirection:
1Press ≤£°›.
2Select the lines you no longer want to redirect.
Turn the redirect ring for a telephone on or off
You can program a telephone to ring briefly (200 milliseconds) when you redirect a call on one of its lines.
You need to start a Unified Manager session to program this feature. For more information about programming using Unified Manager, see the Business Communications Manager Programming Operations Guide
Note: If a telephone has redirect ring enabled, it rings briefly for redirected calls on one of its lines when another telephone has set up the line redirection.
The following displays appear when redirecting lines:
Intercom
Line Redirection
QUIT ADD REMOVE
No line to use
You selected the intercom button as the facility on which to place the call. Enter a line pool code or a destination code.
Press • or ADD to begin redirection. Press £ or REMOVE to cancel a previous redirection.
You have one external line on your telephone, but you need a second line to perform line redirection. Redirect your external line using a line pool as the outgoing line.
Telephone Features Programming Guide
