
116 Chapter 13 Hospitality Services
Alarm time (AL) feature
The Alarm time feature provides an alarm clock capability on both room sets and common sets which can be programmed to sound an audible alert at a requested time.
One Alarm time within a 24 hour period is programmable on a room or common set and must be reset daily. When the alarm sounds, all sets in a given room ring. If you cancel the alarm on any set, it cancels the alarm on all the sets in the room. A new Alarm time entered on a room or common set overwrites any alarms previously assigned.
If the system experiences a power failure, this can result in missed Alarm times. When the system is running and the system time resets, the missed Alarm times ring in respective room or common sets. The system allows a maximum of 25 sets with alarms.
Program the Alarm time feature
To program the Alarm time feature on a telephone:
1Press ≤°‡fi.
The display shows Alrm: 07:00am OFF. If the alarm time is correct press ON. The display shows Alrm:07:00am ON.
2Press DONE to exit. or
To enter a new alarm time press CHG. The display shows Enter time:. Enter a new 4 digit alarm time.
When using the 24 hour clock format (hour: 00 to 23 and minutes: 00 to 59), no confirmation is required. The display shows Alarm ON hh:mm.
When using the 12 hour format, the display shows hh:mm AM or PM?. Press the AM or PM display button. The display shows Alarm ON hh:mm.
To program the Alarm time feature on an analog telephone:
1Press ≤•°‡fi. A tone sounds.
2Enter a 4 digit alarm time.
When using the 24 hour clock format (hour: 00 to 23 and minutes: 00 to 59), a tone sounds. When using the 12 hour format, press • to select am, or £ to select pm. A tone sounds.
At the assigned times, the set in the room rings to
Change or cancel an Alarm time
When you enter a new Alarm time it overwrites any times previously assigned. If you cancel the Alarm time for any set, it cancels the Alarm time for all the sets in the same room.
P0937240 02