Toshiba TLP-S10 CONTROL terminal, Separately Sold Product

40

■CONTROL terminal

●Pin assignment

7

6

8

5

4

3

21

Signal Name

RXD

CTS

DSR

GND

RTS

N.C

TXD

N.C

Pin No.

1

2

3

4

5

6

7

8

Description

Receiving data

Consent to send

Data set ready

Signal ground

Request to send

No connection

Sending data

No connection

Mini DIN 8 pin connector

●Interface format

1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;

Stop Bit Length: 1 bit

2 Communication format STX (02h) Command (3Byte) ETX (03h)

Only 1 command valid per communication.

3 Data format For input commands, only ASCII-compliant all-uppercase

alphanumeric characters supported.

4 Replies Acknowledge ACK (06h) CR (0Dh) Data ... Normally ended

ACK (06h) ESC (1Bh) ... Aborted

No acknowledge NAK (15h)

If commands are to be sent consecutively, wait for the response from the projector

before sending the next command.

●Main Commands

Note

•Contact your dealer for control cable and other commands.

■Separately Sold Product

Replacement Lamp Model TLPLV3

Note

•Design, specifications, etc. subject to change without notice for improvements, etc.

Item Command

Power on PON

Power off POF

Icon display on MO0

Icon display off MO1

Auto setting (RGB input) PAT

Status display on DON

Status display off DOF

Specifications (Continued)

Item Command

Computer input select IN1

Y/PB/PR input select IN2

Video input select IN3

S-video input select IN4

Contents

Main IMPORTANT SAFETY INSTRUCTIONS Before Using SAFETY PRECAUTIONS 1. Read Owner's Manual 2. Power Sources IMPORTANT SAFETY INSTRUCTIONS (Continued) 11. Object and Liquid Entry 12. Do not place the product vertically 13. Stack Inhibited 14. Attachments IMPORTANT SAFETY INSTRUCTIONS (Continued) 16. Damage Requiring Service 18. Servicing 19. Replacement Parts 20. Safety Check LABEL LOCATIONS POWER SUPPLY CORD SELECTION IMPORTANT PRECAUTIONS Moisture Condensation Place and Manner of Installation EXEMPTION CLAUSES OTHER CAUTIONS AND INFORMATIONS Copyrights Disposal Trademarks CONTENTS Maintenance 1514 Names of each part on the main unit Preparations Checking the package contents The Supplied CD-ROM Installing Acrobat Reader Preparing and using the remote control 1716 Operating the remote control Remote control transmitter Loading dry-cell batteries into the remote control Connection Computer CRT monitor, etc. Placement Styles p.30 Placement Turning the power on and off Turning the power off Press the ON/STANDBY button. C B Basic operations Computer Y/P Video S-video Correcting the keystone distortion (Keystone) Press the KEYSTONE button. Using handy features Enlarging the picture size (Resize) Press the remote controls RESIZE button. To decrease the enlargement ratio, press the remote controls RESIZE button. Press and hold down the buttons to move the enlarged area. Using handy features (Continued) Cutting off the picture and sound temporarily (Mute) Press the remote controls MUTE button. Freezing the image (Freeze) Press the remote controls FREEZE button. Using the menus Using handy features (Continued) 6. End 4. Back 1. Start 2. Select a Category Using the menu (Continued) The image adjustment menu The default setting menu Air filter cleaning Maintenance WARNING Unplug power cord. Remove the air filter. Trouble indications Others Remove the lamp cover. Pull out the lamp. Mount the new lamp. Before calling service personnel Is the power cord plugged in? Is it connected to the projector? Is the lamp cover loose? Are all the connected devices functioning properly? Is the projector turned on? Is the projection distance within the projectors supported range? Is the screen dirty? Is the lamp nearing the end of its service life? Specifications (Continued) List of supported signals (RGB signals) Signals whose resolution exceeds the LCD panels number of pixels ) List of supported signals (Y/PB/PR signals) CONTROL terminal Pin assignment Interface format Main Commands Separately Sold Product