The steps in ”Modifying OSPF Interfaces” of chapter 11, “Configuring the OSPF Routing Protocol” should read as follows:
1.Administratively disable the interface on which you want to modify OSPF.
*Note: You must disable the interface to perform any OSPF modifications to the interface.
2.In the navigation pane of the Web Agent window, expand the Routing > IP > OSPF folders.
3.Click Interfaces.
The OSPF Interfaces page opens (Figure
4.Modify the OSPF interface parameters. Refer to Table
5.Administratively enable the modified interface.
*Note: You must reenable the interface for the switch to accept the modifications.
Technical Support
To contact Avaya’s technical support:
*Note: These are new phone numbers as of October 1, 2000.
■From the United States:
■From North America:
■Outside North America: Contact your distributor
34 | June 14, 2001 |
