Camera Operation
MIRROR
-ON : Sets a horizontal image inversion.
-OFF : Cancels the inversion.
Troubleshooting
If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician.
Problem | Solution | |
Nothing appears on | • Please check the power connection. | |
• Please check the video signal line connection. | ||
the screen. | ||
• Please check the Brightness of Auto Iris lens. | ||
|
MIRROR ON | MIRROR OFF |
SHARPNESS: The outline of the video image becomes cleaner and more distinctive as the level of SHARPNESS increases. If the level goes up excessively, however, it may affect the video image and generate noise.
•Please press the SETUP button.
The video image is not clear.
•Please check if the lens is clean. Please clean the lens with a clean cloth or brush.
•Please adjust the contrast feature of the monitor.
•Please make sure that the screen is not exposed directly to a bright light. Please move the camera if necessary.
•The available range of level is 0 ~ 31.
RESET: Returns to the level which was set by the manufacturer for shipment.
RETURN: Returns to the SETUP menu.
The screen is dark. | • Please adjust the contrast feature of the monitor. |
| • If you have an intermediate device, set the 75Ω/ |
| |
| page 18) |
| • Please adjust the brightness level of the Auto Iris |
| lens. |
| • If you take the focus of the lens, adjust the focus |
| lever of the lens. |
EXIT
Saves all the setting menus and then exits.
There is a problem with the camera operation. The camera surface is too hot and black stripes appear on the screen.
•Please check if an appropriate power source to the camera complies with the manufacturer's standard requirement, or if the voltage keeps changing.
COLOR DOME CAMERA 34 User’s Manual | COLOR DOME CAMERA 35 User’s Manual |
