Camera Operation
Select any function you | Modes can be changed |
wish to operate by | |
using the UP and | using the LEFT and |
DOWN buttons. | RIGHT buttons. |
3.Please press the LEFT or RIGHT button if you wish to change mode.
•When the LEFT or RIGHT button is pressed, available values and modes are displayed in order. Please keep pressing the button until you get to the mode you wish to operate.
4.Please select 'EXIT' and then press the SETUP button to finish the setting.
Notes
•If 
appears at the mode you wish to operate, it means that there is a sub- menu which can be selected by pressing the SETUP button.
•
LENS(Adjusting to the brightness level)
This function is used to adjust the brightness of the screen.
1.When the SETUP menu is displayed on the screen, please position the arrow to point to 'LENS' by using the UP and DOWN buttons.
COLOR DOME CAMERA 22 User’s Manual
2. Using the SETUP button, you can control the brightness of the screen.
Notes
•The brightness of the screen can be adjusted within the range of 1~70. The optimum level of brightness for the user can be achieved by adjustment.
3.Please press the SETUP button if you wish to return to the previous menu.
SHUTTER (condition and speed control)
Because of using the DC lens, the shutter speed is fixed at 1/60.
1.When the SETUP menu is on the screen, please position the arrow to point to 'SHUTTER' by using the DOWN button.
2.Please select the shutter mode by pressing the LEFT or RIGHT button.
FLK: Please select 'FLK' mode when flickering occurs on the screen, due to an imbalance between illumination and frequency. NTSC Model:1/100, PAL MODEL: 1/120
3. Please press the SETUP button when all the settings are complete.
COLOR DOME CAMERA 23 User’s Manual
