2.Enable or disable the suboptions as appropriate in the DHCP Option - Circuit Info and DHCP Option 82 - Agent Info fields.
Changing the Status of Option 82 by Using the CLI
To use the CLI to change the status of option 82, enter Global
Configuration mode and use the following commands:
■To enable suboption 1, use the following command:
>(config)# ip dhcp
■To enable suboption 2, use the following command:
>(config)# ip dhcp
■To disable suboption 1, use the following command:
>(config)# no ip dhcp
■To disable suboption 2, use the following command:
>(config)# no ip dhcp
*Note: For information on how to enter Global Configuration command mode, see “Accessing/Exiting the Command Modes” in chapter 1 of Cajun P550R/P880/P882 Command Reference Guide.
Changing the Status of Option 82 by Using SNMP
To change the status of option 82 by using SNMP, use the MIB items that are listed in Table 3. These MIB items are defined in cjnipv4serv.mib.
Table 3. MIB, MIB Items and OIDs for Option 82
MIB | MIB Item | OID |
|
|
|
cjnipv4serv.mib | cjnDHCPOpt82Sub1Enabled | 1.3.6.1.4.1.1751.2.43.2.5.5.1 |
|
|
|
| cjnDHCPOpt82Sub2Enabled | 1.3.6.1.4.1.1751.2.43.2.5.5.2 |
|
|
|
June 14, 2001 | 13 |
