Configuring Port Mirroring By Using the Web Agent
Setting Up Port Mirroring
To use the Web Agent to set up port mirroring:
1.Expand the Modules & Ports folder.
2.Click Port Mirroring.
The Port Mirroring Information page opens.
3.In the Source Port column, select the port that you want to mirror.
4.In the Mirror Port column, select the port to which you want to mirror traffic.
Both the source port and mirror port must either:
—Be on the same vlan and have the same vlan binding or
—Have vlan binding set to bind to all
5.In the Direction column, select the direction of traffic that you want to mirror.
6.In the Sampler Type column, select how often you want the mirror port to receive traffic samples.
7.Do one of the following:
IF you select . . . | THEN . . . |
|
|
Periodic in the Sampler | In the Max Packets per |
Type column | Second column, enter the |
| maximum number of packets |
| per second that you want the |
| mirror port to receive. |
|
|
Disable or Always in the | Go to step 8. |
Sampler Type column |
|
|
|
8.Click Apply.
June 14, 2001 | 11 |
