EN
13

Recording Mode Setting

Set the tape recording mode depending on your
preference.
1Set the Power Switch to “
MANUAL
” while pressing
down the Lock Button located on the switch. The
power lamp lights and the camcorder is turned on.
2Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3Rotate the MENU/BRIGHT wheel to select
“ CAMERA” and press it. The CAMERA Menu
appears.
4Rotate the MENU/BRIGHT wheel to select “REC
MODE” and press it. The Sub Menu appears. Select
“SP” or “LP” by rotating the MENU/BRIGHT wheel
and press it. Rotate the MENU/BRIGHT wheel to
select “ RETURN”, and press it twice. The Menu
Screen closes.
•Audio Dubbing ( pg. 63) and Insert Editing
( pg. 64) are possible on tapes recorded in the
SP mode.
•“LP” (Long Play) is more economical, providing
1.5 times the recording time.
NOTES:
●If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
●It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.
●During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
SPREC MODE –
LP
Display
Menu Screen
Sub Menu
MENU/BRIGHT Wheel
Power Switch
Lock Button
Power Lamp
GR-DVL867/DVL865/DVL767/
DVL765/DVL567/DVL367/DVL365
only