66
EN

Using The Camcorder As A WebCam

(GR-DVL867/DVL865 only)
This camcorder can be used as a WebCam via USB
connection.
1Make sure all necessary software (provided) are
installed in your PC and all units are turned off.
2Connect the camcorder to your PC using the USB
cable.
3Set the VIDEO/MEMORY Switch to “MEMORY”
and set the Power Switch to “
AUTO
” or “
MANUAL
”,
then turn on the PC.
•“Web CAMERA” appears on the screen.
•If the PC is not powered on, the camcorder does not
enter the Web Camera mode.
4 When finished, turn off the PC first, then the
camcorder. Disconnect the USB cable from the
camcorder and PC.
NOTES:
●It is recommended to use the AC Adapter as the
power supply instead of the battery pack (墌 pg. 9).
●Use the provided software PIXELA ImageMixer to
capture video in real-time.
●You can also use the camcorder for webconference by
using Windows® Microsoft Netmeeting and signing up
for Microsoft Hotmail.
●In the Web Camera mode, the following buttons cannot
be operated: E-MAIL, SNAPSHOT, the Recording
Start/Stop button.
b CAMERAeW bCAMERAeW
P
C
To USB
connector
USB cable
(provided)
To USB
Power Switch
USB-equipped PC
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
Display

SYSTEM CONNECTIONS

(cont.)
Refer to the instruction manuals of the PC and
provided Software.