32
EN
Dubbing Still Images Recorded On A Tape
To A Memory Card
Still images can be dubbed from a tape to a memory
card.
1Load a memory card ( pg. 14) and cassette
( pg. 12).
2Set the VIDEO/MEMORY Switch to “VIDEO”,
then set the Power Switch to “PLAY” while pressing
down the Lock Button.
3Press the MENU/BRIGHT wheel in. The Menu
Screen appears. Rotate it to select “ VIDEO” and
press it. The VIDEO Menu appears.
4Rotate the MENU/BRIGHT wheel to select
“ COPY” and press it. The Sub Menu
appears. Rotate it to select “ON” and press it.
Selection is complete.
5Rotate the MENU/BRIGHT wheel to select “
RETURN” and press it twice. The normal playback
screen reappears.
6To select a video image to be dubbed, start
playback by pressing
4
/6. At the moment you find
the image you wish to dub, press it again to engage
Still Playback.
7To start dubbing, press SNAPSHOT. The selected
image is stored on the memory card.
•“ ” blinks during dubbing.
NOTES:
●If SNAPSHOT is pressed in step 7 when a memory
card is not loaded, the message “COPYING FAILED” is
displayed.
●If an image recorded on the tape using the WIDE mode
( pg. 48) is dubbed to a memory card, the WIDE
mode identifying signal is not dubbed with it.
●To use Playback Special Effects with a video image you
wish to dub, perform up to step 7 using the remote
control (provided) ( pg. 56).
●Images are dubbed in 640 x 480 pixels.
ADVANCED FEATURES
(cont.)
44
COPY OFF
ON
–
6
SP
6
SP
Play/Pause Button (
4
/6)
Display
Power Switch
SNAPSHOT Button
Lock Button
MENU/BRIGHT Wheel
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
Menu Screen
E-MAIL Button
Stop Button (5)