EN
21
Rewind Button (
2
)
Fast-Forward Button (
3
)
Play/Pause Button (
4
/6)
Stop Button (5)
Power Zoom Lever (VOL.)
Speaker
TAPE PLAYBACK

Normal Playback

1Load a tape ( pg. 12).
2Set the VIDEO/MEMORY Switch to “VIDEO”
(GR-DVL867/DVL865/DVL767/DVL765/DVL567/
DVL367/DVL365 only), then set the Power Switch to
“PLAY” while pressing down the Lock Button located on
the switch. To start playback, press
4
/6.
•To stop playback, press 5.
•Press
2
to rewind, or
3
to fast-forward the tape
during Stop mode.
To Control The Speaker Volume . . .
.....slide the Power Zoom Lever (VOL.) towards “+”
to turn up the volume, or towards “–” to turn down
the volume.
VIDEO/MEMORY Switch
(GR-DVL867/DVL865/
DVL767/DVL765/
DVL567/DVL367/DVL365
only; open the LCD
monitor to access this
switch.)
NOTES:
●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To
turn on again, set the Power Switch to “OFF”, then to “PLAY”.
●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV ( pg. 22).
●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.
●LCD monitor/viewfinder indications:
•When power is supplied from a battery: the “” battery pack remaining power indicator is displayed.
When power is supplied from an AC outlet: “” does not appear.
•During Stop mode, none of the indications are displayed.
●When a cable is connected to the AV connector, the sound is not heard from the speaker.

Still Playback:

Pauses during playback.
1)Press
4
/6 during playback.
2)To resume normal playback, press
4
/6 again.
●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.
After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.
●When
4
/6 is pressed, the image may not pause immediately while the camcorder stabiliseds the still image.

Shuttle Search:

Allows high-speed search in either direction.
1)Press
3
for forward or
2
for reverse search during playback.
2)To resume normal playback, press
4
/6.
●During playback, press and hold
2
or
3
. The search continues as long as you hold the button. Once you
release it, normal playback resumes.
●A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
Frame-By-Frame Playback: Allows frame-by-frame search.
1)Engage Still Playback.
2)Rotate the MENU/BRIGHT wheel towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse
Frame-By-Frame Playback during Still Playback.
●To resume normal playback, press
4
/6.
●You can also use the provided remote control for Frame-By-Frame Playback ( pg. 56).

Slow-Motion Playback/Playback Special Effects and Playback Zoom

Available only with the remote control (provided) ( pg. 56, 57).
ATTENTION
During Shuttle Search, parts of the picture may not be clearly visible, particularly on
the left side of the screen.