JVC GR-DVL867, GR-DVL865, GR-DVL567 specifications Using USB or PC connection cable, Using DV cable

SYSTEM	CONNECTIONS		EN 65
[A] Using USB or PC connection cable
		GR-DVL167/DVL160 only
		PC connection cable	To
		(provided with
	To PC		RS-232C
		GR-DVL167 only)
	To USB	USB cable	To USB
		(provided)	connector
			PC
	GR-DVL867/DVL865/DVL767/DVL765/DVL567/DVL367/DVL365 only
[B] Using DV cable		OR
	Power Switch
		Core filter	Core filter
	To DV	DV cable (optional)	To DV
			connector
			PC with DV
			connector
VIDEO/MEMORY
Switch (GR-DVL867/DVL865/DVL767/DVL765/DVL567/DVL367/DVL365 only;
open the LCD monitor to access this switch.)

Connection To A Personal Computer

[A] Using USB or PC connection cable

This camcorder can transfer still images to a PC by using the software (GR-DVL867/DVL865/DVL767/ DVL765/DVL567/DVL367/DVL365/DVL167: provided, GR-DVL160: optional software HS- V16KITE).

[B] Using DV cable

It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1 Make sure the camcorder and PC are turned off.

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 For GR-DVL867/DVL865/DVL767/DVL765/ DVL567/DVL367/DVL365 Owners:

If you are using the USB connection, set the VIDEO/ MEMORY switch to “MEMORY”.

4 Turn the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

5 When finished, turn off the PC first, then the camcorder.

NOTES:

●Refer to “SOFTWARE INSTALLATION AND USB (or PC) CONNECTION GUIDE” for the installation of the bundled software and drivers.

●It is recommended to use the AC Adapter as the power supply instead of the battery pack (
pg. 9).

●Never connect the USB or PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●The system may not work properly depending on the PC or capture board you are using.

For GR-DVL867/DVL865/DVL767/DVL765/DVL567/ DVL367/DVL365 Owners:

“ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “AC- CESSING FILES” is displayed on the LCD monitor since this can result in product damage.