26
EN

MEMORY CARD RECORDING

Basic Shooting (Snapshot)

You can use your camcorder as a digital still camera
for taking snapshots.
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
●Power ( pg. 8)
●Grip Adjustment ( pg. 10)
●Viewfinder Adjustment ( pg. 10)
●Loading A Memory Card ( pg. 14)
●Picture Quality/Image Size Setting ( pg. 14)
1Set the VIDEO/MEMORY Switch to “MEMORY”,
then set the Power Switch to “
AUTO
” or “
MANUAL
”
while pressing down the Lock Button located on the
switch.
2Press SNAPSHOT. “PHOTO” appears while the
snapshot is being taken.
The image is recorded on the memory card.
•Still images are recorded in the snapshot mode with
no frame.
Power Switch
SNAPSHOT Button
Lock Button
VIDEO/MEMORY Switch (Open the
LCD monitor to access this switch.)
51
1024
Display
Shooting icon
Appears and blinks during shooting.
Image Size
Displays the image file size: 1280 (1280 x 960)*, 1024 (1024 x 768) or 640 (640 x 480)
( pg. 14).
*GR-DVL867/DVL865/DVL767/DVL765 only.
Remaining number of shots
Displays the remaining number of shots that can be stored.
The number increases or decreases depending on the Picture Quality/Image Size, etc.
Picture Quality
Displays the quality of image: F (Fine) or S (Standard) (in order of quality) ( pg. 14).
Card icon
Appears during shooting and blinks when a memory card is not loaded:
(SD Memory Card) or (MultiMediaCard).