14
EN
GETTING STARTED
(cont.)
Memory card
Card Cover
Clipped edge
Label
TYQUAL I
REC SELECT
FINE
021X7486
IMAGE SIZE
NRETUR
Display
MENU/BRIGHT Wheel
Power Switch
Lock Button
Power Lamp

Loading A Memory Card

(GR-DVL867/DVL865/DVL767/DVL765/DVL567/DVL367/
DVL365 only)
The provided memory card is already inserted in the
camcorder when you receive the camcorder.
1Make sure the camcorders power is off.
2Press PUSH OPEN and open the LCD monitor,
then open the card cover (MEMORY CARD).
3Insert the memory card clipped edge first.
Do not touch the terminal on the reverse side of the
label.
4To close the card cover, push it until you hear a
click.
To Unload A Memory Card . . .
.....in step 3 push the memory card, which then
comes out of the camcorder automatically. Pull it
out and close the card cover.
NOTES:
Be sure to use only SD Memory Cards marked
�� or MultiMediaCards marked
.
Some brands of memory cards are not compatible with
this camcorder. Before purchasing a memory card ,
consult its manufacturer or dealer.
Before using a new memory card, it is necessary to
FORMAT the card. pg. 36.
ATTENTION
Do not insert/remove the memory card while the
camcorder is turned on, as this may cause the
memory card to be corrupted or cause the camcorder
to become unable to recognize whether or not the
card is installed.

Picture Quality/Image Size Setting

(GR-DVL867/DVL865/DVL767/DVL765/DVL567/DVL367/
DVL365 only)
The Picture Quality/Image Size can be selected to
best match your needs. Refer to the chart on page 27
for your selection.
1Set the VIDEO/MEMORY Switch to MEMORY,
then set the Power Switch to
MANUAL
while pressing
down the Lock Button located on the switch. The
power lamp lights and the camcorder turns on.
2Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3Rotate the MENU/BRIGHT wheel to select
DSC and press it. The DSC Menu appears.
4Rotate the MENU/BRIGHT wheel to select
QUALITY and press it. The Sub Menu appears.
Rotate the MENU/BRIGHT wheel to select the
desired mode and press it.
5Rotate the MENU/BRIGHT wheel to select
IMAGE SIZE and press it. The Sub Menu appears.
Rotate the MENU/BRIGHT wheel to select the
desired mode and press it.
6Rotate the MENU/BRIGHT wheel to select
RETURN, and press it twice. The Menu Screen
closes.