JVC GR-DVL567, GR-DVL865, GR-DVL867 specifications 52 EN, Dubbing To a VCR

Engage the VCR’s AUX and Record-Pause modes.

52 EN DUBBING

Connector cover*

Power Switch

To AV

	To
	S-VIDEO
		Audio/Video cable
		[mini-plug to RCA plug]
		(provided)
	S-Video cable
	(optional)
			To AUDIO, VIDEO**
			and -IN
			connectors
“Y/C”/“CVBS”			Cable Adapter (provided)
video out
			If your VCR has a SCART
select switch
			connector, use the
			provided cable adapter.

VCR TV

*When connecting the cables, open this cover.

**Connect when an S-Video cable is not used.

Dubbing To A VCR

1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 22 and 23.

2 Set the VIDEO/MEMORY Switch to “VIDEO” (GR- DVL867/DVL865/DVL767/DVL765/DVL567/DVL367/ DVL365 only), then set the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3

4 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6 on the camcorder.

5 Press 4/6 on the camcorder and engage the VCR’s Record mode.

6 Engage the VCR’s Record-Pause mode and press 4/6 on the camcorder.

7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.

NOTES:

●As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

●Set the video out select switch of the cable adapter as

required:

Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in

the Menu Screen (
pg. 50).

Or, press DISPLAY on the remote control (provided) to turn on/off the date indication.

•Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (
pg. 50).

•Playback Sound Mode, Tape Speed And Tape Running Displays

..... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen (
pg. 50).