30 EN, Protecting Files, To Remove Protection

30 EN

ADVANCED FEATURES

MENU/BRIGHT Wheel

Power Switch

Lock Button

VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)

SELECT Button

Display

Menu Screen

PROTECT

DELETE

DPOF

NO . RESET

FORMAT

D I SPLAY

END

PROTECT CURRENT

PROT . ALL

CANC . ALL

RETURN

Protecting Files

The Protect mode helps prevent the accidental erasure of files.

1 Load a memory card ( pg. 14).

2 Set the VIDEO/MEMORY Switch to “MEMORY”, then set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

•A stored file is displayed.

If you want to select another type of file, go to step 3. If not, go to step 4.

3 Press SELECT. The MEMORY SELECT Screen appears. Rotate the MENU/BRIGHT wheel to select the type of file: IMAGE or E-MAIL CLIP ( pg. 33). Then press the MENU/BRIGHT wheel in. The selected type of file is displayed.

4 Press the MENU/BRIGHT wheel in. The Menu Screen appears. Rotate the MENU/BRIGHT wheel to select “PROTECT”, then press it.

5 Rotate the MENU/BRIGHT wheel to select the desired mode.

CURRENT : Protects the currently displayed file.

PROT.ALL : Protects all files stored on the memory card.

6 Press the MENU/BRIGHT wheel in. The PROTECT Screen appears.

•If you selected “CURRENT” in step 5, press 2 or 3to select the desired file.

7 Rotate the MENU/BRIGHT wheel to select “EXECUTE” and press it.

•To cancel protection, select “RETURN”.

NOTES:

●If the “” mark appears, the currently displayed file is protected.

●When the memory is initialised or corrupted, even protected files are deleted. If you do not want to lose important files, transfer them to a PC and save them.

TO REMOVE PROTECTION

Before doing the following, perform steps 1 through 4 above.

5 Rotate the MENU/BRIGHT wheel to select the desired mode.

CURRENT : Removes protection from the currently displayed file.

PROTECT

PROTECT Screen

CANC.ALL : Removes protection from all files stored on the memory card.

PROTECTED