3Com MSR 50, MSR 30 manual Mpls L2VPN Configuration, Ccc interface in-label out-label

MPLS L2VPN CONFIGURATION

97 COMMANDS

ccc interface in-label out-label

Syntax ccc ccc-connection-name interface interface-type interface-number in-labelin-label-value out-labelout-label-value { nexthop ip-address out-interfaceinterface-type interface-number } [ control-wordno-control-word]

undo ccc ccc-connection-name

View System view

Parameter ccc-connection-name: Name for the CCC connection, a string of 1 to 20 characters. It is used for uniquely identifying a CCC connection on a PE.

interface-typeinterface-number: Specifies the interface connecting the local CE by its type and number.

in-label-value: Incoming label, in the range 16 to 1023.

out-label-value: Outgoing label, in the range 16 to 1023.

nexthop ip-address: Specifies the IP address of the next hop.

out-interfaceinterface-type interface-number: Specifies the outgoing interface by its type and number.

control-word: Enables the control word option.

no-control-word: Disables the control word option.

Description Use the ccc interface in-labelout-labelcommand to create a remote CCC connection between CEs connected to different PEs.

Use the undo ccc command to delete a CCC connection.

This command must be configured on both of the PEs.

A PE uses connection names to identify different CCC connections. A CCC connection can have different names on different PEs.

If a P router is connected with a PE, you must configure a static LSPs between them.