3Com MSR 30, MSR 50 manual Display isdn active-channel, Display isdn call-info

564CHAPTER 37: ISDN CONFIGURATION COMMANDS

display isdn active-channel

Syntax display isdn active-channel [ interface interface-typeinterface-number]

View Any view

Parameter interface-typeinterface-number:Specifies an interface by its type and number.

Description Use the display isdn active-channelcommand to view the active call information on ISDN interfaces. If no interface has been specified, the system will display the active call information on all the ISDN interfaces.

The displayed information can help you with ISDN call troubleshooting.

Example # Display the active call information on the interface BRI 1/0.

<Sysname> display isdn active-channel interface bri 1/0 Bri 1/0

Channel Info: B1
Call Property: Digital	Call Type: Out
Calling Number: -	Calling Subaddress: -
Called Number: 6688164	Called Subaddress: -
UserName: -	IP Address: -
Start Time: 05-04-30 14:27:52
Time Used: 00:04:34

Table 94 Description on the fields of the display isdn active-channel command

Field	Description
Channel Info	Information about the channel
Call Property	Call property: digital or analog
Call Type	Call type: incoming or outgoing
Calling Number	Calling number
Calling Subaddress	Calling subaddress
Called Number	Called number
Called Subaddress	Called subaddress
UserName	User name used in PPP negotiation for authentication
IP Address	IP address of the peer end
Start Time	Time at which the link was set up
Time Used	Duration of the call

display isdn call-info

Syntax display isdn call-info [ interface interface-typeinterface-number]

View Any view

Parameter interface-typeinterface-number: Specifies an interface by its type and number.