367

Description Use the sdlc simultaneous command to configure the SDLC synchronous serial interface to work in two-way simultaneous mode, so that the primary SDLC station can send data to and receive data from a secondary station at the same time.

Use the undo sdlc simultaneous command to restore the default mode.

By default, the data transmission mode is “alternate”.

Example # Enable the two-way simultaneous mode for SDLC data on Serial 2/0.

<Sysname> system-view

[Sysname] interface serial 2/0

[Sysname-Serial2/0] sdlc simultaneous

sdlc status

Syntax

sdlc status { primary secondary }

 

undo sdlc status { primary secondary }

View

Synchronous serial interface view

Parameter

primary: Specifies that the SDLC device connected to the router is “secondary”.

 

secondary: Specifies that the SDLC device connected to the router is “primary”.

Description

Use the sdlc role command to configure a SDLC role.

 

Use the undo sdlc role command to remove the configured SDLC role.

 

By default, the device has no role.

 

SDLC is an “unbalanced” link layer protocol. That is, the end systems across a TCP

 

connection are not equal in the positions: one is primary and the other is

 

secondary. The primary station, whose role is primary, plays a dominant role and

 

controls the whole connection process. The secondary station, whose role is

 

secondary, is controlled by the primary station. Therefore, we need to configure a

 

role for an SDLC interface.

 

In the SDLC role configuration, the role of an interface should be determined by

 

the role of the SDLC device to which this router is connected:

 

If the SDLC device connected with the local router has a role of primary, the

 

local interface should be configured to have a role of secondary;

 

If the SDLC device connected with the local router has a role of secondary, the

 

local interface should be configured to have a role of primary.

 

Generally, an IBM mainframe has a role of primary, while a terminal device such

 

as a UNIX host or an Auto Teller Machine (ATM) has a role of secondary.

Page 367
Image 367
3Com MSR 50, MSR 30 manual Sdlc status primary secondary, Undo sdlc status primary secondary