1748 CHAPTER 102: DVPN TUNNEL CONFIGURATION COMMANDS

Related command: interface tunnel on page 884.

Example # Configure the DVPN tunnel mode.

<Sysname> system-view

[Sysname] interface tunnel 0

[Sysname-Tunnel0] tunnel-protocol dvpn udp

vam client

Syntax vam client client-name

undo vam client

View Tunnel interface view

Parameter client-name: Name of the VAM client, a case-insensitive string of 1 to 31 characters.

Description Use the vam client command to specify the VAM client to be referenced on a DVPN tunnel interface.

Use the undo vam client command to remove the VAM client.

By default, a DVPN tunnel interface references no VAM client.

Note that a DVPN tunnel interface can reference only one VAM client.

Related command: interface tunnel on page 884 and tunnel-protocolon page 887.

Example # Configure DVPN tunnel interface Tunnel0 to reference VAM client abc.

<Sysname> system-view

[Sysname] interface tunnel 0

[Sysname-Tunnel0] vam client abc

Page 1748
Image 1748
3Com MSR 30, MSR 50 manual Vam client, Related command interface tunnel on, Example # Configure the Dvpn tunnel mode