3Com MSR 50, MSR 30 User Interface Configuration Commands, Acl ipv6 acl-number inbound outbound

USER INTERFACE CONFIGURATION

164 COMMANDS

acl

Syntax	For basic and advanced ACL, use the following commands:
	acl [ ipv6 ] acl-number{ inbound outbound }
	undo acl [ ipv6 ] acl-number{ inbound outbound }
	For layer 2 ACL, use the following commands:
	acl acl-numberinbound
	undo acl acl-numberinbound
View	VTY user interface view
Parameter	ipv6: When this keyword is present, the command supports IPv6; otherwise, it
	supports IPv4.
	acl-number: Number of access control list, in the range 2000 to 4999, where
	■ 2000 to 2999 are the basic ACL number
	■ 3000 to 3999 are the advanced ACL number
	■ 4000 to 4999 are the layer 2 ACL number
	inbound: Controls dial-in for a user interface.
	outbound: Controls dial-out for a user interface.
Description	Use the acl command to reference an ACL to control dial-in or dial-out of the
	current users.
	Use the undo acl command to remove the ACL.
	For details regarding ACL, refer to “IPv4 ACL Configuration Commands” on page
	2087 and “IPv6 ACL Configuration Commands” on page 2103.
	By default, dial-in and dial-out of VTY users are not restricted.

Example # Remove the restriction on outgoing calls for VTY 0.