3Com MSR 30, MSR 50 manual Display isdn call-record

566CHAPTER 37: ISDN CONFIGURATION COMMANDS

Table 95 Description on the fields of the display isdn call-info command

Field	Description
CCIndex	Index of the call at the CC layer
State	Current state of the layer 3 link of the BRI interface. It can
	be one of the following:
	NULL
	CALL_INITIATED
	OVERLAP_SENDING
	OUTGOING_CALL_PROCEEDING
	CALL_DELIVERED
	CALL_PRESENT
	CALL_RECEIVED
	CONNECT_REQUEST
	INCOMING_CALL_PROCEEDING
	ACTIVE
	DISCONNECT_REQUEST
	DISCONNECT_INDICATION
	SUSPEND_REQUEST
	RESUME_REQUEST
	RELEASE_REQUEST
	OVERLAP_RECEIVING
CES	Connection endpoint suffix
Channel	ISDN B channel map for the call
Calling_Num[:Sub]:	Calling number: calling sub-address.
Called_Num[:Sub]	Called number: called sub-address

display isdn call-record

Syntax display isdn call-record [ interface interface-typeinterface-number]

View Any view

Parameter interface-typeinterface-number: Specifies an interface by its type and number.

Description Use the display isdn call-recordcommand to view the information of ISDN call history. If no interface is specified, the system displays all ISDN call history.

Executing this command will display information of the calls activated up to now, but the number of retained entries is limited to 100.

Example # Display the information of ISDN call history.

<Sysname> display isdn call-record
Call	Calling	Called	Start	Stop	Seconds
Type	Number	Number	Time	Time	Used
In	10660016	10660016	03-07-05 11:23:09	-	0
In	10660022	10660022	03-07-05 11:23:09	-	0