3Com MSR 50, MSR 30 manual Mld send-router-alert, Mld static-group, Undo mld send-router-alert

1453

mld send-router-alert

Syntax	mld send-router-alert
	undo mld send-router-alert
View	Interface view
Parameter	None
Description	Use the mld send-router-alertcommand to enable insertion of the Router-Alert
	option into MLD messages to be sent from the current interface.
	Use the undo mld send-router-alertcommand to disable insertion of the
	Router-Alert option into MLD messages to be sent from the current interface.
	By default, MLD messages carry the Router-Alert option.
Related command:	send-router-alert (MLD view) and mld require-router-alert.
Example	# Disable insertion of the Router-Alert option into MLD messages to be sent from
	Ethernet 1/0.
	<Sysname> system-view
	[Sysname] interface ethernet 1/0
	[Sysname-Ethernet1/0] undo mld send-router-alert

mld static-group

Syntax	mld static-groupipv6-group-address [ source ipv6-source-address ]
	undo mld static-group{ all ipv6-group-address [ source ipv6-source-address ] }
View	Interface view
Parameter	all: Removes all static IPv6 multicast groups that the current interface has joined.
	ipv6-group-address: IPv6 multicast group address, in the range of FFxy::/16
	(excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y), where x and y represent any
	hexadecimal number ranging from 0 to F.
	ipv6-source-address: IPv6 address of the specified multicast source.
Description	Use the mld static-groupcommand to configure the current interface to be a
	statically-connected member of the specified IPv6 multicast group.
	Use the undo mld static-groupcommand to remove the configuration.
	By default, an interface is not a statically-connected member of any IPv6 multicast
	group.