3Com MSR 30, MSR 50 manual If-match tag, Ip as-path, Syntax if-match tag value Undo if-match tag

1202 CHAPTER 78: ROUTING POLICY COMMON CONFIGURATION COMMANDS

nssa-external-type1or2: OSPF NSSA Type 1 or 2 external routes.

Description Use the if-matchroute-typecommand to configure a route type match criterion.

Use the undo if-matchroute-typecommand to remove the match criterion.

The match criterion is not configured by default.

Examples # Create a routing policy named policy1 with node 10, matching mode as permit. Define an if-match clause to match internal routes.

<Sysname> system-view

[Sysname] route-policy policy1 permit node 10

[Sysname-route-policy] if-match route-type internal

if-match tag

Syntax if-match tag value

undo if-match tag

View Routing policy view

Parameters value: Specifies a tag value, ranging from 0 to 4294967295.

Description Use the if-match tag command to specify a tag for matching against the tag field of the routes.

Use the undo if-match tag command to remove the match criterion.

The match criterion is not configured by default.

Related commands: if-match interface, if-match acl, if-matchip-prefix,if-match ip next-hop,if-match cost, route-policy,apply ip-addressnext-hop,apply cost, apply local-preference,apply origin and apply tag.

Examples # Create a routing policy named policy1 with node 10, matching mode as permit. Define an if-match clause to permit RIP, OSPF and IS-IS routing information with the tag as 8.

<Sysname> system-view

[Sysname] route-policy policy1 permit node 10

[Sysname-route-policy] if-match tag 8

ip as-path

Syntax ip as-pathas-path-number { deny permit } regular-expression

undo ip as-path as-path-number