Chapter 3
B A S I C F U N C T I O N S
Playing a Disc
Before Play
-Turn on your TV and set it to the correct Video Input on the TV's remote control.
-If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select a language, press a NUMBER button. (This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use.
Once you select a menu language, you can change it by pressing the 
button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the SELECT MENU LANGUAGE window appears again where you can reset your preferred language.
Playback
1
Press the OPEN/CLOSE ( 
) button.
The STANDBY indicator light goes out and the tray opens.
Basic Functions
2
Place a disc gently into the tray with the disc’s label facing up.
3
Press the PLAY/PAUSE ( 
) button or OPEN/CLOSE ( 
) button to close the disc tray.
▼ RESUME function
When you stop disc play, the player remembers where you stopped, so when you press PLAY/PAUSE ( 
) button again, it will pick up where you left off. (unless the disc is removed or the player is unplugged, or if you press the STOP ( 
) button twice.)
