3Com MSR 50 Poe max-power system view, Syntax poe max-power max-power Undo poe max-power

2499

By default, the PSE is disabled from detecting nonstandard PDs.

Example # Enable PSE 2 to detect nonstandard PDs.

<Sysname> system-view

[Sysname] poe legacy enable pse 2

poe max-power

Syntax poe max-power max-power

undo poe max-power

View PoE interface view/PoE-profile file view

Parameter max-power: Maximum power in milliwatts allocated to a PoE interface. The range of this argument varies with devices.

Description Use the poe max-powercommand to configure the maximum power for a PoE interface.

Use the undo poe max-powercommand to restore the default maximum power of a PoE interface.

By default, the maximum power of the PoE interface is 15,400 milliwatts.

Example # Set the maximum power of Ethernet 1/0 to 12,000 milliwatts.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] poe max-power 12000

#Set the maximum power of Ethernet 1/0 to 12,000 milliwatts through a PoE configuration file.

<Sysname> system-view [Sysname] poe-profile abc

[Sysname-poe-profile-abc-1] poe max-power 12000

[Sysname-poe-profile-abc-1] quit [Sysname] interface ethernet 1/0 [Sysname-Ethernet1/0]apply poe-profile name abc

poe max-power (system view)

Syntax poe max-power max-power[ pse pse-id] undo poe max-power [ pse pse-id]

View System view