3Com MSR 50, MSR 30 manual Interface mfr, Interface serial, 399

399

interface mfr

Syntax interface mfr { interface-number interface-number.subnumber }

undo interface mfr { interface-number interface-number.subnumber }

View System view

Parameter interface-number: MFR interface number, in the range 0 to 1023.

interface-number.subnumber: MFR subinterface number, of which, interface-numberis the main interface number, and subnumber is subinterface number. The subnumber argument ranges from 0 to 1023.

Description Use the interface mfr command to create a multilink frame relay bundle interface or subinterface and enter the corresponding interface view.

Use the undo interface mfr command to delete a specified multilink frame relay bundle interface or subinterface.

By default, there is no multilink frame relay interface or subinterface.

Before an MFR subinterface is created, the MFR interface must be created first.

Before using the undo interface mfr command to delete an MFR interface, you must delete all physical interfaces from the MFR interface.

For MFR interface, if there is one bundle link is in up state, the MFR physical state is up. Moreover, all bundle links should be tagged as down before the bundle is down. The link layer protocol on MFR interface is determined by LMI packet negotiation.

Example # Create a multilink frame relay bundle interface MFR4 with a point-to-multipoint subinterface.

<Sysname> system-view

[Sysname] interface mfr 4

[Sysname-MFR4] quit

[Sysname] interface mfr 4.1

[Sysname-MFR4.1]

interface serial

Syntax interface serial interface-number.subnumber [ p2p p2mp ]

undo interface serial interface-number.subnumber

View System view

Parameter interface-number: Main interface number.