3Com MSR 50 Hookoff-time, Private-lineand caller-permitcommands when executing, Incoming calls

2597

	Use the undo hookoff-modecommand to remove the binding.
	By default, no FXS voice subscriber line is bound to the FXO voice subscriber line.
	After an FXS voice subscriber line is bound to the FXO voice subscriber line, the
	off-hook/on-hook state of these two lines will be consistent.
n	■ To keep the consistent off-hook/on-hook state between the bound FXS and
	FXO voice subscriber lines, you must consider the configurations of the
	private-lineand caller-permitcommands when executing the
	hookoff-mode delay bind fxs_subscriber_line command. The FXS voice
	subscriber line specified by fxs_subscriber_line must be the one to which the
	dedicated line number points. In addition, only the bound FXS voice subscriber
	line is allowed to originate calls to the FXO voice subscriber line by restricting
	incoming calls.
	■ The bound FXS and FXO voice subscriber lines must come from the same
	device.
Example	# Specify the delay off-hook mode for the FXO voice subscriber line and bind FXS
	voice subscriber line 1/24 to the FXO voice subscriber line.
	<Sysname> system-view
	[Sysname] voice-setup
	[Sysname-voice] subscriber-line 1/0
	[Sysname-subscriber-line 1/0] hookoff-mode delay bind 1/24

hookoff-time

Syntax hookoff-time time

undo hookoff-time

View Analog FXO voice subscriber line view

Parameter time: Length of the on-hook timer in seconds, in the range of 60 to 36,000.

Description Use the hookoff-timecommand to configure the on-hook timer length.

Use the undo hookoff-timecommand to restore the default on-hook timer length.

By default, no on-hook timer length is set.

Example # Set the on-hook timer length to 500 seconds.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] subscriber-line 1/0

[Sysname-voice-line1/0] hookoff-time 500