Cisco Systems 6500 manual crypto pki export pkcs12, 2-11, Defaults Command Modes Command History

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

crypto pki export pkcs12

crypto pki export pkcs12

To export a PKCS12 file from the SSL Services Module, use the crypto pki export pkcs12 command.

	crypto pki export trustpoint_label pkcs12 file_system [pkcs12_filename] pass_phrase
Syntax Description	trustpoint_label	Specifies the trustpoint label.
	file_system	Specifies the file system. Valid values are scp:, ftp:, nvram:, rcp:, and tftp:
	pkcs12_filename	(Optional) Specifies the name of the PKCS12 file to import.
	pass_phrase	Specifies the pass phrase of the PKCS12 file.

Defaults

Command Modes

Command History

This command has no default settings.

Global configuration

Release	Modification
Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
12.1(13)E and	switches.
SSL Services Module
Release 1.1(1)
SSL Services Module	The syntax for this command changed from crypto ca to crypto pki.
Release 3.1(1)

Usage Guidelines Imported key pairs cannot be exported.

If you are using SSH, we recommend using SCP (secure file transfer) when exporting a PKCS12 file. SCP authenticates the host and encrypts the transfer session.

If you do not specify pkcs12_filename, you will be prompted to accept the default filename (the default filename is the trustpoint_label) or enter the filename. For the ftp: or tftp: value, include the full path in the pkcs12_filename.

You will receive an error if you enter the pass phrase incorrectly.

If there is more than one level of CA, the root CA and all the subordinate CA certificates are exported in the PKCS12 file.

Catalyst 6500 Series Switch SSL Services Module Command Reference

OL-9105-01 2-11