Cisco Systems 6500 manual Natpool nat-pool-name startipaddr endipaddr netmask netmask

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

natpool

natpool

To define a pool of IP addresses, which the SSL Services Module uses for implementing the client NAT, use the natpool command.

natpool nat-pool-name start_ip_addr end_ip_addr netmask netmask

Syntax Description	nat-pool-name	NAT pool name.
	start-ip-addr	First IP address in the pool.
	end-ip-addr	Last IP address in the pool.
	netmask netmask Specifies the netmask address.
Defaults	This command has no default settings.
Command Modes	Context subcommand mode
Command History	Release	Modification
	Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
	12.1(13)E and	switches.
	SSL Services Module
	Release 1.1(1)
	SSL Services Module The natpool command (entered in context subcommand mode) replaces
	Release 3.1(1)	the ssl-proxy natpool command (entered in global subcommand mode).
Examples	This example shows how to define a pool of IP addresses:
	ssl-proxy(config)#ssl-proxy context Example
	ssl-proxy(config-context)#natpool NP2 207.59.10.01 207.59.10.08 netmask 255.0.0.0
	ssl-proxy (config-context)#
	show ssl-proxy natpool
Related Commands

Catalyst 6500 Series Switch SSL Services Module Command Reference

2-30 OL-9105-01