Cisco Systems 6500 After you enter the group keyword, This example, you must enter a channel

Chapter 1 Command-Line Interface

How to Find Command Options

Table 1-2 How to Find Command Options (continued)

Command		Comment
ssl-proxy(config-if)# channel-group group ?		After you enter the group keyword,
<1-256>	Channel group number	enter a ? to display what you must
ssl-proxy(config-if)#channel-group group		enter next on the command line. In
		this example, you must enter a channel
		group number from 1 to 256.
		Because a <cr> is not displayed, it
		indicates that you must enter more
		information to complete the
		command.
ssl-proxy(config-if)# channel-group 1 ?		After you enter the channel group
mode Etherchannel Mode of the interface		number, enter a ? to display what you
ssl-proxy(config-if)#		must enter next on the command line.
		In this example, you must enter the
		mode keyword.
		Because a <cr> is not displayed, it
		indicates that you must enter more
		information to complete the
		command.
ssl-proxy(config-if)# channel-group 1 mode ?		After you enter the mode keyword,
auto	Enable PAgP only if a PAgP device is detected	enter a ? to display what you must
desirable	Enable PAgP unconditionally	enter next on the command line. In
on	Enable Etherchannel only
		this example, you must enter the auto,
ssl-proxy(config-if)#		desirable, or on keyword.
		Because a <cr> is not displayed, it
		indicates that you must enter more
		information to complete the
		command.
ssl-proxy(config-if)#channel-group 1 mode auto ?		In this example, the auto keyword is
<cr>		entered. After you enter the auto
ssl-proxy(config-if)#		keyword, enter a ? to display what you
		must enter next on the command line.
		Because a <cr> is displayed, it
		indicates that you can press Return to
		complete the command. If additional
		keywords are listed, you can enter
		more keywords or press Return to
		complete the command.
ssl-proxy(config-if)#channel-group 1 mode auto		In this example, press Return to
ssl-proxy(config-if)#		complete the command.

Catalyst 6500 Series Switch SSL Services Module Command Reference

1-4 OL-9105-01