Cisco Systems 6500 delayed-ack-threshold delay, delayed-ack-timeout timer, forced-ack, no nagle

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

policy tcp

Usage Guidelines After you define the TCP policy, you can associate the TCP policy with a proxy server using the proxy-policy TCP configuration submode commands.

Each proxy-policy TCP configuration submode command is entered on its own line.

Table 2-5lists the commands that are available in proxy-policy TCP configuration submode.

Table 2-5 Proxy-policy TCP Configuration Submode Command Descriptions

Syntax	Description
[no] buffer-share rx buffer-limit-in-bytes	Allows you to configure the maximum size of the receive buffer share per
	connection; valid values are from 8192 to 262144. Use the no form of this
	command to return to the default setting.
[no] buffer-share tx buffer-limit-in-bytes	Allows you to configure the maximum size of the transmit buffer share per
	connection; valid values are from 8192 to 262144. Use the no form of this
	command to return to the default setting.
default	Sets a command to its default settings.
delayed-ack-threshold delay	Allows you to configure the delayed ACK threshold. The default is 2. The
	valid range is from 1 to 10.
delayed-ack-timeout timer	Allows you to configure the delayed ACK timeout. The default is 200
	seconds. The valid range is from 50 to 500 seconds.
exit	Exits from proxy-service configuration submode.
forced-ack	Allows you to enable the forced-ACK algorithm.
help	Provides a description of the interactive help system.
[no] mss max-segment-size-in-bytes	Allows you to configure the maximum segment size that the connection
	identifies in the generated SYN packet; valid values are from 64 to 1460.
	Use the no form of this command to return to the default setting.
[no] nagle	Allows you to enable or disable the Nagle algorithm. Nagle is enabled by
	default.
[no] timeout fin-wait timeout-in-seconds	Allows you to configure the FIN wait timeout; valid values are from 75 to
	600 seconds. Use the no form of this command to return to the default
	setting.
[no] timeout inactivity timeout-in-seconds	Allows you to configure the inactivity timeout; valid values are from 0 to
	960 seconds. This command allows you to set the aging timeout for an idle
	connection and helps protect the connection resources. Use the no form of
	this command to return to the default setting.
[no] timeout syn timeout-in-seconds	Allows you to configure the connection establishment timeout; valid values
	are from 5 to 75 seconds. Use the no form of this command to return to the
	default setting.

Catalyst 6500 Series Switch SSL Services Module Command Reference

2-46 OL-9105-01