Cisco Systems 6500 debug ssl-proxy, pki type ssl type tcp type vlan, content type, fdu type, 2-23

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

debug ssl-proxy

debug ssl-proxy

To turn on the debug flags in different system components, use the debug ssl-proxycommand. Use the no form of this command to turn off the debug flags.

debug ssl-proxy {app content [type] fdu [type] flash [module [module]] health-probe ipc

	pki [type] ssl [type] tcp [type] vlan}
Syntax Description	app	Turns on App debugging.
	content type	Turns on content debugging; (optional) type valid values are detail, error,
		ipc, module module, rewriting, and scanning. See the “Usage Guidelines”
		section for additional information.
	fdu type	Turns on FDU debugging; (optional) type valid values are cli, hash, ipc, and
		trace. See the “Usage Guidelines” section for additional information.
	flash	Turns on Flash debugging.
	module module	Specifies the module to be debugged.
		The available options for the module variable are as follows:
		•	fdu—FDU CPU
		•	ssl1—SSL1 CPU
		•	tcp1—TCP1 CPU
	health-probe	Turns on health probe debugging.
	ipc	Turns on IPC debugging.
	pki type	Turns on PKI debugging; (optional) type valid values are cert, events,
		history, ipc, and key. See the “Usage Guidelines” section for additional
		information.
	ssl type	Turns on SSL debugging; (optional) type valid values are alert, error,
		handshake, and pkt. See the “Usage Guidelines” section for additional
		information.
	tcp type	Turns on TCP debugging; (optional) type valid values are event, packet,
		state, and timers. See the “Usage Guidelines” section for additional
		information.
	vlan	Turns on VLAN debugging.
Defaults	This command has no default settings.
Command Modes	EXEC

Catalyst 6500 Series Switch SSL Services Module Command Reference

OL-9105-01 2-23