Cisco Systems 6500 manual policy tcp, 2-45, Defaults, Command Modes, Release, Modification

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

policy tcp

policy tcp

To enter the proxy policy TCP configuration submode, use the policy tcp command. In proxy-policy TCP configuration submode, you can define the TCP policy templates.

policy tcp tcp-policy-name

Syntax Description	tcp-policy-name	TCP policy name.
Defaults	The defaults are as follows:
	• buffer-share rx is 32768 bytes.
	• buffer-share tx is 32768 bytes.
	• delayed-ack-threshold is 2.
	• delayed-ack-timeout is 200 seconds.
	• mss is 1460 bytes.
	• nagle is enabled.
	• timeout syn is 75 seconds.
	• timeout reassembly is 60 seconds.
	• timeout inactivity is 600 seconds.
	• timeout fin-wait is 600 seconds.
	• tos carryover is disabled.
Command Modes	Context subcommand mode
Command History	Release	Modification
	Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
	12.1(13)E and	switches.
	SSL Services Module
	Release 1.1(1)
	SSL Services Module	This command was changed to add the timeout reassembly time
	Release 1.2(1)	subcommand.
	SSL Services Module	This command was changed to add the tos carryover subcommand.
	Release 2.1(4)
	SSL Services Module	The policy tcp command (entered in context subcommand mode)
	Release 3.1(1)	replaces the ssl-proxy policy tcp command (entered in global
		subcommand mode).
		This command was changed to add the following submode commands:
		•	forced-ack
		•	nagle

Catalyst 6500 Series Switch SSL Services Module Command Reference

OL-9105-01 2-45