Cisco Systems 6500 Show interfaces ssl-proxy 0.subinterface, Policy tcp, Show ionterfaces

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

show interfaces ssl-proxy

show interfaces ssl-proxy

To display information about the configured subinterfaces, use the show interfaces ssl-proxycommand.

show interfaces ssl-proxy 0.subinterface

Syntax Description	subinterface-number	Subinterface ID; valid values are from 0 to 4294967295.
Defaults	This command has no default settings.

Command Modes

Command History

EXEC

Release	Modification
SSL Services Module	Support for this command was introduced on the Catalyst 6500 series
Release 3.1(1)	SSL Services Module.

Examples	This example shows how to display information about the configured subinterfaces:
	ssl-proxy#	show ionterfaces 0.3
	SSL-Proxy0.3 is up, line protocol is up
	Hardware	is STE interface, address is 0001.6445.c744 (bia 00e0.14c1.30e9)
	Internet	address is 10.10.0.16/8
	MTU 1500	bytes, BW 1000000 Kbit, DLY 10 usec,
	reliability 255/255, txload 1/255, rxload 1/255
	Encapsulation 802.1Q Virtual LAN, Vlan ID 3.
	ARP type: ARPA, ARP Timeout 04:00:00
	Last clearing of "show interface" counters never
	ssl-proxy#
	policy tcp
Related Commands

Catalyst 6500 Series Switch SSL Services Module Command Reference

OL-9105-01 2-59