Cisco Systems 6500 manual Show ssl-proxy natpool namecontext name, Context name, Natpool

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

show ssl-proxy natpool

show ssl-proxy natpool

To display information about the NAT pool, use the show ssl-proxy natpool command.

show ssl-proxy natpool [name][context name]

Syntax Description	name	(Optional) NAT pool name.
	context name	(Optional) Context name.

Defaults

Command Modes

Command History

This command has no default settings.

EXEC

Release	Modification
Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
12.1(13)E and	switches.
SSL Services Module
Release 1.1(1)
SSL Services Module	This command was changed to add the context name keyword.
Release 3.1(1)

Examples	This example shows how to display information for a specific NAT address pool that is configured on
	the SSL Services Module:
	ssl-proxy#show ssl-proxy natpool
	No context name provided, assuming context 'Default'...
	natpool-name	start-ip	end-ip	netmask	use-count
	n1	207.57.110.1	207.57.110.8	255.0.0.0	2
	ssl-proxy#

		This example shows how to display information for a specific NAT address pool that is configured on
		the SSL Services Module:
		ssl-proxy#show ssl-proxy natpool n1
		No context name provided, assuming context 'Default'...
		Start ip: 207.57.110.1
		End ip: 207.57.110.8
		netmask: 255.0.0.0
		vlan associated with natpool: 2
		SSL proxy services using this natpool:
		S2
		S3
		Num of proxies using this natpool: 2
		ssl-proxy#
		natpool
Related Commands
		Catalyst 6500 Series Switch SSL Services Module Command Reference
	OL-9105-01		2-71