Cisco Systems 6500 manual show ssl-proxy stats type, content, 2-77, Usage Guidelines, Release

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

show ssl-proxy stats

show ssl-proxy stats

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

To display information about the statistics counter, use the show ssl-proxy stats command.

show ssl-proxy stats [type]

type	(Optional) Information type; valid values are content, context, crypto, fdu,
	hdr, ipc, module, pki, service, ssl, tcp, and url. See the “Usage
	Guidelines” section for additional information.

This command has no default settings.

EXEC

Release	Modification
Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
12.1(13)E and	switches.
SSL Services Module
Release 1.1(1)
SSL Services Module	The output of the show ssl-proxy stats command was changed to
Release 1.2(1)	include information about the session allocation failure and session
	limit-exceed table.
SSL Services Module	This command was changed to add the following keywords:
Release 3.1(1)	•	content
	•	context
	•	hdr
	•	module module
	•	url

The type values are defined as follows:

•content—Displays content scan object statistics.

•context—Displays context statistics information.

•crypto—Displays crypto statistics.

•fdu—Displays FDU statistics.

•hdr—Displays HTTP header insertion statistics.

•ipc—Displays IPC statistics.

Catalyst 6500 Series Switch SSL Services Module Command Reference

OL-9105-01 2-77