Cisco Systems 6500 manual Used by the hot standby group is learned using Hsrp, 100

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

standby ip

Examples	This example shows how to activate HSRP for group 1 on Ethernet interface 0. The IP address that is
	used by the hot standby group is learned using HSRP.
	ssl-proxy	(config-subif)# standby 1 ip
	ssl-proxy	(config-subif)#

This example shows how to indicate that the IP address is a secondary hot standby router interface:

ssl-proxy (config-subif)# standby ip 1.1.1.254 ssl-proxy (config-subif)# standby ip 1.2.2.254 secondary ssl-proxy (config-subif)# standby ip 1.3.3.254 secondary

	Catalyst 6500 Series Switch SSL Services Module Command Reference
2-100	OL-9105-01