Cisco Systems 6500 manual service client command, 2-52, Defaults, Command Modes, Release

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

service

service

To enter the proxy-service configuration submode, use the service command.

service ssl-proxy-name [client]

Syntax Description	ssl-proxy-name	SSL proxy name.
	client	(Optional) Allows you to configure the SSL-client proxy services. See the
		service client command.
Defaults	Server NAT is enabled, and client NAT is disabled.
Command Modes	Context subcommand mode
Command History	Release	Modification
	Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
	12.1(13)E and	switches.
	SSL Services Module
	Release 1.1(1)
	SSL Services Module	This command was changed to add the following submode commands:
	Release 2.1(1)	• authenticate
		• policy urlrewrite policy-name
		• trusted-caca-pool-name
		• sslv2—See the server ipaddr subcommand.
	SSL Services Module	The service command (entered in context subcommand mode) replaces
	Release 3.1(1)	the ssl-proxy service command (entered in global subcommand mode).
		This command was changed to add the following submode commands:
		• policy health-probe tcp policy-name
		• policy http-header policy-name
Usage Guidelines	You cannot use the same service_name for both the server proxy service and the client proxy service.
	In proxy-service configuration submode, you can configure the virtual IP address and port that is
	associated with the proxy service and the associated target IP address and port. You can also define TCP
	and SSL policies for both the client side (beginning with the virtual keyword) and the server side of the
	proxy (beginning with the server keyword).

In client proxy-service configuration submode, you specify that the proxy service accept clear-text traffic, encrypt it into SSL traffic, and forward it to the back-end SSL server.

Catalyst 6500 Series Switch SSL Services Module Command Reference

2-52 OL-9105-01